In front of a lot of knowledge about the submersible axial flow pump, you should understand it, today we will tell you about the characteristics of the submersible axial flow pump, hope to help you:

Submersible axial flow pump is a submersible pump that works on the principle of axial flow, which is characterized by large flow and low head, flow per hour can reach tens of thousands of square, and the head does not exceed 20 meters. The motor is multi-pole motor, low speed. Installation methods are mostly shaft type and sled type, often used in pumping stations, known as flood discharge tools!

The submersible axial flow pump product motor pump coaxial, motor is dry fully enclosed submersible three-phase asynchronous motor.

Submersible axial flow pump adopts double, triple mechanical seal and auxiliary seal structure, F class insulation, protection level IP68, and set seal leakage, winding and bearing temperature rise, junction box and oil chamber water detection device in the motor, all detection signals are fed back to a submersible pump special protector on the electric control cabinet for monitoring, sound and light alarm when failure. To ensure the normal operation of the electric pump.

Because the submersible axial flow pump motor and pump constitute one, reduce the installation height, the weight of the unit is reduced by 40% than the traditional pump, there is no need to consume labor on the site, time-consuming complex axis alignment process, on-site installation is very convenient, about 2-3 hours to install a full set of electric pump.

Because the submersible axial flow pump dives into the water, the water flows from the motor surface, the motor is cooled well, there is no high temperature in the pump station, there is no noise, the underground pump station can be built, the ground style can be maintained, and the total cost of civil construction can be saved by 30%-40%. Easy to operate, easy to achieve remote control, and automatic control.

The submersible axial flow pump transport medium is raw water or mild sewage, the transport liquid temperature is 50 degrees, the PH value is 4-10, the volume ratio of the transport medium is below 2%, the density of the medium is less than 1.2*1000Kg/m3, the product is very suitable for the water level fluctuation along the river, the lake, is the best way to solve the motor flood control problem.

The product has a variety of installation methods, can be divided into: suspension installation, floor installation, cable-stayed installation, open installation and so on.

The use of this type of submersible electric pump is to solve the problem of water level fluctuation along the river, lake area to build a pump station, to solve the motor flood control achievements, and eliminate the long shaft and intermediate bearings between the pump, so that the unit operation double reliable.

Submersible axial flow pump: The motor driving the pump is a dry fully enclosed submersible three-phase asynchronous motor, which can be submerged in water for a long time, with a series of unparalleled advantages of traditional units.

Since the motor and the pump are integrated, there is no need to end the assembly process of the time-consuming motor, transmission mechanism and pump axis alignment at the assembly site, and on-site assembly is convenient and fast.

These are the characteristics of submersible axial flow pumps that Xiaobian tells you. If you want to know more about submersible axial flow pumps and mining submersible pumps, you can browse our official website or contact us directly. We will provide you with more professional information!